Population pharmacokinetics of mycophenolic acid in pediatric patients with primary IgA nephropathy / 中国药房

OBJECTIVE To develop a population pharmacokinetic （PPK） model for mycophenolate mofetil active metabolite mycophenolic acid （MPA） in children with primary IgA nephropathy， explore the factors affecting the pharmacokinetic parameters of MPA， and provide a basis for clinical individualized therapy. METHODS Retrospective collection was conducted on 636 concentrations and clinical data from 47 pediatric patients with primary IgA nephropathy. PPK analysis was carried out by using the nonlinear mixed-effects model； the covariates were tested with a stepwise method. Goodness-of-fit plots， Bootstrap and visual predictive check were employed to evaluate the final model. RESULTS The pharmacokinetics of MPA in children with IgA nephropathy in vivo conformed to the first-order absorption and elimination two-compartment model （objective function value of 3 276.31）. Covariate analysis suggested that body weight and albumin （ALB） levels were significant influencing factors on apparent clearance rate and apparent distribution volume. The typical values of PPK parameters of MPA in the final model were as follows： the central room had a distributed volume of 5.79 L， the clearance rate was 4.06 L/h， the volume of peripheral ventricular distribution was 430.93 L， the clearance rate between compartments was 15.40 L/h， the oral absorption rate constant was 1.29 h－1. After verification， most of the predicted corrected observed concentration points were within the 90% confidence interval of the predicted corrected simulated concentration， indicating that the MPA final model had good predictive performance. CONCLUSIONS The PPK model of MPA in children with primary IgA nephropathy is established in this study， identifying body weight and ALB levels are significant factors affecting MPA metabolism.

Preparation and preliminary evaluation of SARS-CoV-2 DNA vaccine based on PLGA nanoparticles / 药学学报

We constructed and optimized the plasmid DNA (pDNA) Opt-S encoding the gene of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) spike (S) protein, using poly (lactic-co-glycolic acid) copolymer (PLGA) as a delivery carrier for pDNA. PLGA-pDNA NPs were loaded by nanoprecipitation and its properties in vitro were preliminary evaluated. The results showed that the prepared PLGA-pDNA NPs were regular morphology, clear edges, with an average particle size of (184.2 ± 2.4) nm, polydisperse index (PDI) of 0.093 ± 0.013, zeta potential of (-68.10 ± 0.36) mV, and encapsulation rate of (98.92 ± 0.22)%. The PLGA-pDNA NPs were stable at -20 ℃ for 7 months and could protect pDNA against nuclease degradation. And they also exhibited sustained release of pDNA in vitro. The PLGA-pDNA NPs have low cytotoxicity and high safety. In addition, in vitro transfection experiments showed that the SARS-CoV-2 S gene could enter cells and be expressed. These results indicate that PLGA-pDNA NPs non-viral gene vector have simple preparation process and good performance, which are expected to provide a new idea for the research and development of SARS-CoV-2 vaccine.

Research progress of artificial intelligence in 3D printed drugs / 药学学报

In 2015, the United States put forward the concept of precision medicine, which changed medical treatment from "one size fits all" to personalization, and paid more attention to personalization and drug customization. In the same year, Spritam®, the world's first 3D printed tablet, was in the market, marking the emerging pharmaceutical 3D printing technology was recognized by regulatory authorities, and it also provided a new way for drug customization. 3D printing technology has strong interdisciplinary and high flexibility, which puts forward higher requirements for pharmaceutical staffs. With the development of artificial intelligence (AI), modern society can perform various tasks, such as disease diagnosis and robotic surgery, with superhuman speed and intelligence. As a major AI technology, machine learning (ML) has been widely used in many aspects of 3D printing drug, accelerating the research and development, production, and clinical application, and promoting the new process of global personalized medicine and industry 4.0. This paper introduces the basic concepts and main classifications of 3D printing drug, non-AI drug optimization technology and ML. It focuses on the analysis of the research progress of ML in 3D printing drug, and elucidates how AI can empower the intelligent level of 3D printing drug in pre-processing, printing, and post-processing process. It provides a new idea for accelerating the development of 3D printed drug.

A case of combined oxidative phosphorylation deficiency 32 caused by MRPS34 gene variation and literature review / 中华儿科杂志

Objective: To investigate the clinical features and genetic features of combined oxidative phosphorylation deficiency 32 (COXPD32) caused by MRPS34 gene variation. Methods: The clinical data and genetic test of a child with COXPD32 hospitalized in the Department of Neurology, Children's Hospital, Capital Institute of Pediatrics in March 2021 were extracted and analyzed. A literature search was implemented using Wanfang, China biology medicine disc, China national knowledge infrastructure, ClinVar, human gene mutation database (HGMD) and Pubmed databases with the key words "MRPS34" "MRPS34 gene" and "combined oxidative phosphorylation deficiency 32" (up to February 2023). Clinical and genetic features of COXPD32 were summarized. Results: A boy aged 1 year and 9 months was admitted due to developmental delay. He showed mental and motor retardation, and was below the 3rd percentile for height, weight, and head circumference of children of the same age and gender. He had poor eye contact, esotropia, flat nasal bridge, limbs hypotonia, holding instability and tremors. In addition, Grade Ⅲ/6 systolic murmur were heard at left sternal border. Arterial blood gases suggested that severe metabolic acidosis with lactic acidosis. Brain magnetic resonance imaging (MRI) showed multiple symmetrical abnormal signals in the bilateral thalamus, midbrain, pons and medulla oblongata. Echocardiography showed atrial septal defect. Genetic testing identified the patient as a compound heterozygous variation of MRPS34 gene, c.580C>T (p.Gln194Ter) and c.94C>T (p.Gln32Ter), with c.580C>T being the first report and a diagnosis of COXPD32. His parents carried a heterozygous variant, respectively. The child improved after treatment with energy support, acidosis correction, and "cocktail" therapy (vitaminB1, vitaminB2, vitaminB6, vitaminC and coenzyme Q10). A total of 8 cases with COXPD32 were collected through 2 English literature reviews and this study. Among the 8 patients, 7 cases had onset during infancy and 1 was unknown, all had developmental delay or regression, 7 cases had feeding difficulty or dysphagia, followed by dystonia, lactic acidosis, ocular symptoms, microcephaly, constipation and dysmorphic facies(mild coarsening of facial features, small forehead, anterior hairline extending onto forehead,high and narrow palate, thick gums, short columella, and synophrys), 2 cases died of respiratory and circulatory failure, and 6 were still alive at the time of reporting, with an age range of 2 to 34 years. Blood and (or) cerebrospinal fluid lactate were elevated in all 8 patients. MRI in 7 cases manifested symmetrical abnormal signals in the brainstem, thalamus, and (or) basal ganglia. Urine organic acid test were all normal but 1 patient had alanine elevation. Five patients underwent respiratory chain enzyme activity testing, and all had varying degrees of enzyme activity reduction. Six variants were identified, 6 patients were homozygous variants, with c.322-10G>A was present in 4 patients from 2 families and 2 compound heterozygous variants. Conclusions: The clinical phenotype of COXPD32 is highly heterogenous and the severity of the disease varies from development delay, feeding difficulty, dystonia, high lactic acid, ocular symptoms and reduced mitochondrial respiratory chain enzyme activity in mild cases, which may survive into adulthood, to rapid death due to respiratory and circulatory failure in severe cases. COXPD32 needs to be considered in cases of unexplained acidosis, hyperlactatemia, feeding difficulties, development delay or regression, ocular symptoms, respiratory and circulatory failure, and symmetrical abnormal signals in the brainstem, thalamus, and (or) basal ganglia, and genetic testing can clarify the diagnosis.

Role of histone posttranslational modifications in the regulation of ovarian function / 生理学报

The ovary is the reproductive organ of female mammals, which is responsible for producing mature eggs and secreting sex hormones. The regulation of ovarian function involves the ordered activation and repression of genes related to cell growth and differentiation. In recent years, it has been found that histone posttranslational modification can affect DNA replication, damage repair and gene transcriptional activity. Some regulatory enzymes mediating histone modification are co-activators or co-inhibitors associated with transcription factors, which play important roles in the regulation of ovarian function and the development of ovary-related diseases. Therefore, this review outlines the dynamic patterns of common histone modifications (mainly acetylation and methylation) during the reproductive cycle and their regulation of gene expression for important molecular events, focusing on the mechanisms of follicle development and sex hormone secretion and function. For example, the specific dynamics of histone acetylation are important for the arrest and resumption of meiosis in oocytes, while histone (especially H3K4) methylation affects the maturation of oocytes by regulating their chromatin transcriptional activity and meiotic progression. Besides, histone acetylation or methylation can also promote the synthesis and secretion of steroid hormones before ovulation. Finally, the abnormal histone posttranslational modifications in the development of two common ovarian diseases (premature ovarian insufficiency and polycystic ovary syndrome) are briefly described. It will provide a reference basis for understanding the complex regulation mechanism of ovarian function and further exploring the potential therapeutic targets of related diseases.

Advances of development and application amino acid biosensors / 生物工程学报

Amino acids are the basic building blocks of protein that are very important to the nutrition and health of humans and animals, and widely used in feed, food, medicine and daily chemicals. At present, amino acids are mainly produced from renewable raw materials by microbial fermentation, forming one of the important pillar industries of biomanufacturing in China. Amino acid-producing strains are mostly developed through random mutagenesis- and metabolic engineering-enabled strain breeding combined with strain screening. One of the key limitations to further improvement of production level is the lack of efficient, rapid, and accurate strain screening methods. Therefore, the development of high-throughput screening methods for amino acid strains is very important for the mining of key functional elements and the creation and screening of hyper-producing strains. This paper reviews the design of amino acid biosensors and their applications in the high-throughput evolution and screening of functional elements and hyper-producing strains, and the dynamic regulation of metabolic pathways. The challenges of existing amino acid biosensors and strategies for biosensor optimization are discussed. Finally, the importance of developing biosensors for amino acid derivatives is prospected.

Research progress of polymer self-healing mechanism and its application in biomedicine / 药学学报

Polymer self-healing is mainly based on the molecular structure and interaction of polymers, and some need external stimulation, such as light, heat, pH, etc. In recent years, many studies have found that the self-healing properties of polymers can prolong the life of materials, while maintaining the mechanical properties of polymers after healing. According to the different action modes of polymer materials, it can be divided into autonomous self-healing and non-autonomous self-healing. Among them, autonomous self-healing mainly works through reversible covalent bonds (Schiff base bond, Diels-Alder reaction, hydrazide bond), reversible non-covalent bonds (hydrogen bond, metal-ligand coordination bond, electrostatic interaction, π-π stacking interaction, hydrophobic interaction) and a combination of the two interactions. Drug carriers with unique self-healing properties play an important role in the encapsulation and stable release of biomacromolecules. In this review, the self-healing mechanism of polymers and their applications in the field of biomedicine were briefly summarized and discussed.

Effects of post-traumatic stress disorder on the excitability of glutamatergic and GABAergic neurons in dorsal and ventral hippocampus in mice / 生理学报

The purpose of this study was to investigate the effects of post-traumatic stress disorder (PTSD) on electrophysiological characteristics of glutamatergic and GABAergic neurons in dorsal hippocampus (dHPC) and ventral hippocampus (vHPC) in mice, and to elucidate the mechanisms underlying the plasticity of hippocampal neurons and memory regulation after PTSD. Male C57Thy1-YFP/GAD67-GFP mice were randomly divided into PTSD group and control group. Unavoidable foot shock (FS) was applied to establish PTSD model. The spatial learning ability was explored by water maze test, and the changes in electrophysiological characteristics of glutamatergic and GABAergic neurons in dHPC and vHPC were examined using whole-cell recording method. The results showed that FS significantly reduced the movement speed, and enhanced the number and percentage of freezing. PTSD significantly prolonged the escape latency in localization avoidance training, shortened the swimming time in the original quadrant, extended the swimming time in the contralateral quadrant, and increased absolute refractory period, energy barrier and inter-spike interval of glutamatergic neurons in dHPC and GABAergic neurons in vHPC, while decreased absolute refractory period, energy barrier and inter-spike interval of GABAergic neurons in dHPC and glutamatergic neurons in vHPC. These results suggest that PTSD can damage spatial perception of mice, down-regulate the excitability of dHPC and up-regulate the excitability of vHPC, and the underlying mechanism may involve the regulation of spatial memory by the plasticity of neurons in dHPC and vHPC.

Mammalian DMRTs: Structure, function and relationship with cancer / 生理学报

DMRT, a gene family related to sexual determination, encodes a large group of transcription factors (DMRTs) with the double-sex and mab-3 (DM) domain (except for DMRT8), which is able to bind to and regulate DNAs. Current studies have shown that the DMRT gene family plays a critical role in the development of sexual organs (such as gender differentiation, gonadal development, germ cell development, etc.) as well as extrasexual organs (such as musculocartilage development, nervous system development, etc.). Additionally, it has been suggested that DMRTs may be involved in the cancer development and progression (such as prostate cancer, breast cancer, lung cancer, etc.). This review summarizes the research progress about the mammalian DMRTs' structure, function and its critical role in cancer development, progression and therapy (mainly in human and mice), which suggests that DMRT gene could be a candidate gene in the study of tumor formation and therapeutic strategy.

Binder jet 3D printing composite bilayer tablet of extended-release printing technology in the study / 药学学报

Based on the dual needs of analgesia and anti-inflammation in trauma treatment, this study uses acetaminophen and moxifloxacin hydrochloride as active pharmaceutical ingredients and develops a composite bilayer tablet with a dual-phase drug release system by using binder jet 3D printing technology. Due to the complexity of the 3D printing process, there is an interaction between the various parameters. Through the optimization of the process, the relationship between the key process parameters can be determined more intuitively. In this study, the process of extended-release tablets was optimized to maintain the mechanical properties of the tablets while realizing the regulation of release. The full-factor experimental design of three central points 23 was used to analyze the factors that significantly affect the quality attributes of extended-release tablets and the interaction between factors. The optimal extended-release process parameters were obtained by the response optimizer: the inkjet quantity of the printing ink was 10 (about 13.8 pL), the powder thickness was 180 μm, and the running speed was 360 mm·s-1. The in vitro of release of 3D printed composite bilayer tablets showed that the in vitro of release of 3D printed tablets and commercially available tablets conformed to the Ritger-Peppas release model. The results of porosity showed that the immediate-release layer of the preparation has many pores and large pore size, and the dissolution of the immediate release layer within 15 min was greater than 85%. The internal pore size of the extended release layer is large, but it can still release slowly for up to 8 h, the mechanism may be related to the extended release of HPMC gelation. On the basis of verifying the rationality of the design goal of 3D printed composite bilayer tablets, this study also provides a theoretical basis for the preparation of 3D printing complex preparations.

Preparation of 3D printed metoprolol tartrate chewable tablets and optimization of printing process / 药学学报

With the growing demand of personalized medicine for children, it is especially important to develop medicines for children. In this study, using metoprolol tartrate as model drug, we developed 3D printed chewable tablets suitable for children with automated dosage distribution using semi-solid extruded (SSE) 3D printing technology. Based on the quality by design concept, this study prepared a semi-solid material with good printability using gelatin as the substrate, constructed 3D models and printed tablets with the aid of computer-aided design. The printing parameters were optimized and determined as follows: print temperature of 35-37 ℃, print speed of 25 mm·s-1, fill rate of 15%, and number of outer profile layers of 2. Subsequently, the printing process and the quality uniformity of the tablets were verified, and a linear relationship between the dose and the number of model layers was obtained. Finally, 3D printed chewable tablets were superior in terms of appearance, dose accuracy and compliance compared with traditional split-dose commercially available tablets. In this study, 3D printed metoprolol tartrate chewable tablets with good performance were successfully prepared to address the personalized medication needs of pediatric patients.

Research progress of exosomes based targeted delivery of antitumor drugs / 药学学报

Exosomes are one of the most important ways of cell-to-cell communication in living lives. They are involved in major physiological and pathological processes, including drug resistance, infection propagation, cancer development and cardiovascular diseases. The biological functions of exosomes made it possess characteristics of low immunogenicity, high delivery efficiency, ability to cross multiple biological barriers and targeting capacity, which also encourage people to try to use it as a drug carrier to overcome the disadvantages of poor stability, low solubility, low bioavailability and high toxicity of some drugs. In this paper, the latest progress of exosomes in the delivery of antitumor drugs, including small chemotherapeutic drugs, biological macromolecules and nucleic acid drugs, is reviewed. In addition, the isolation, drug loading, and modification method and the application prospect of exosomes are also discussed.

Total Ginsenoside Extract from Panax ginseng Enhances Neural Stem Cell Proliferation and Neuronal Differentiation by Inactivating GSK-3β / 中国结合医学杂志

OBJECTIVE@#To study the effects of total ginsenosides (TG) extract from Panax ginseng on neural stem cell (NSC) proliferation and differentiation and their underlying mechanisms.@*METHODS@#The migration of NSCs after treatment with various concentrations of TG extract (50, 100, or 200 µ g/mL) were monitored. The proliferation of NSCs was examined by a combination of cell counting kit-8 and neurosphere assays. NSC differentiation mediated by TG extract was evaluated by Western blotting and immunofluorescence staining to monitor the expression of nestin and microtubule associated protein 2 (MAP2). The GSK-3β/β-catenin pathway in TG-treated NSCs was examined by Western blot assay. The NSCs with constitutively active GSK-3β mutant were made by adenovirus-mediated gene transfection, then the proliferation and differentiation of NSCs mediated by TG were further verified.@*RESULTS@#TG treatment significantly enhanced NSC migration (P<0.01 or P<0.05) and increased the proliferation of NSCs (P<0.01 or P<0.05). TG mediation also significantly upregulated MAP2 expression but downregulated nestin expression (P<0.01 or P<0.05). TG extract also significantly induced GSK-3β phosphorylation at Ser9, leading to GSK-3β inactivation and, consequently, the activation of the GSK-3β/β-catenin pathway (P<0.01 or P<0.05). In addition, constitutive activation of GSK-3β in NSCs by the transfection of GSK-3β S9A mutant was found to significantly suppress TG-mediated NSC proliferation and differentiation (P<0.01 or P<0.05).@*CONCLUSION@#TG promoted NSC proliferation and neuronal differentiation by inactivating GSK-3β.

Follow-up and recurrence markers analysis of anti-myelin oligodendrocyte glycoprotein IgG associated disorders in children / 中华神经科杂志

Objective:To summarize clinical features, outcome and prognosis of anti-myelin oligodendrocyte glycoprotein IgG associated disorders (MOGAD) in children, and to explore the markers of recurrent MOGAD.Methods:The clinical features, imaging, serum and cerebrospinal fluid immune markers, treatments and outcomes were analyzed and compared between children with monophasic and recurrent MOGAD, who were hospitalized in the Department of Neurology, Children′s Hospital Affiliated to the Capital Institute of Pediatrics from January 2019 to February 2020.Results:A total of 22 children were included, of whom 8 patients (36.4%) had a recurrent course and 14 patients (63.6%) had a monophasic course. There was no statistically significant difference in sex, age of onset, clinical symptoms, modified Rankin Scale score, location of lesions and serum anti-myelin oligodendrocyte glycoprotein-IgG (MOG-IgG) titer, overall duration of total immunotherapy, positive antinuclear antibody and history of precursory infection between the two groups ( P>0.05). The serum MOG-IgG titer in the recurrent course group was more likely to remain unchanged or increased, and even increased after treatment, while there was no increase in the serum MOG-IgG titer in the monophasic course group, and the proportion of the patients with serum MOG-IgG titer decreased was higher in the monophasic course group (the monophasic course group: 6/8, the recurrent course group: 2/8), and there was statistically significant difference between the two groups ( P=0.030). The positive rate of MOG-IgG in cerebrospinal fluid in the recurrent course group was significantly higher than that in the monophasic course group at the first attack, the difference being statistically significant (the monophasic course group: 1/10, the recurrent course group: 4/6, P=0.036). The both groups were effecive to first-line immunotherapy, and the clinical symptoms and imaging were completely or partially recovered compared to the acute phase. Seven of 8 patients with recurrent MOGAD were treated with mycophenolate mofetil, and the recurrence rate decreased significantly [annual recurrence rate before treated with mycophenolate mofetil: 2.06 (1.36, 2.34) times/year, annual recurrence rate after treated with mycophenolate mofetil: 0 (0, 0) time/year, Z=-3.26, P=0.001]. The humoral immune status of children treated with mycophenolate mofetil was monitored regularly, and no obvious adverse reactions were found during the follow-up. Conclusions:At least one third of children with MOGAD were recurrent, and the serum MOG-IgG titer of children with recurrent MOGAD continued to be high, and even increased after treatment. Positive MOG-IgG in cerebrospinal fluid at the first attack was found to be a high risk factor for recurrence. The maintenance treatment of mycophenolate mofetil in patients with recurrent MOGAD can significantly reduce the annual recurrence rate and was well tolerated.

Accelerated stability test of sustained-release thienorphine loaded microspheres for injection / 药学学报

In order to meet the clinical needs of long-acting sustained-release thienorphine, injectable thienorphine loaded microspheres were developed, and the accelerated stability study was carried out to explore the suitable storage and transportation conditions of the microspheres. Using poly(lactic-co-glycolic acid) (PLGA) as carrier material, 3 batches of microspheres were prepared in pilot scale with emulsion solvent evaporation method. By investigating the in vitro release of thienorphine loaded microspheres at 37, 45, 52, and 60 ℃, and applying the Arrhenius equation, the linear relationship between the release rate constant (lgk) and the temperature (1/T) was established to obtain the equation: lgk = -8.073/T + 24.35 (R2 = 0.985 3), which showed that the release of microspheres at high temperature can be used to predict the release in vitro at 37 ℃, and 52.0 ± 0.5 ℃ was selected as the accelerated release condition in vitro. The quality research methods were established to investigate the changes of critical quality attributes such as microsphere morphology, drug loading, particle size and distribution, polymer molecular weight, and the related substances under accelerated conditions. The difference factor f1 and similarity factor f2 were used to assess the similarity of release behavior under accelerated conditions. The results showed that under the accelerated experimental conditions of 25 ± 2 ℃ and relative humidity (RH) 60% ± 5%, the critical quality attributes of injectable thienorphine loaded microspheres had no significant change in 6 months, suggesting that the long-term storage condition could be 5 ± 3 ℃.

Development and research of compound caffeine waterless swallowed granules based on reverse engineering / 药学学报

In this study, the reverse engineering technology was used to analyze the prescription and process of Doppelherz® Energy DIRECT, based on the composition of the prescription on the official website of the product, the detection method of composition is established according to the pharmacopoeia and literature information, combined with gravimetric analysis to complete prescription analysis. The prescription composition of the reference listed drug was determined to be composed of caffeine, taurine, vitamin B, anhydrous glucose, citric acid, sorbitol, sucralose, magnesium salts of fatty acids, in which the glucose content was 71.4%, the citric acid content was 7.0% and the magnesium salts of fatty acids content was < 5.8%. According to patent inquiry, Raman imaging and other technologies, the preparation process of the marketed preparation has been basically obtained, and the development of the self-made preparation has been completed on this basis. The study was approved by the Ethics Committee of the Academy of Military Medical Sciences. Combined with the results of the taste evaluation experiment and the caffeine dissolution test of the preparation in 1 min, the hot-melt extrusion technology was screened out as the taste-masking technology of the self-made preparation, the parameters of the hot-melt extrusion process were screened by differential scanning calorimetry analysis, and finally a product with good taste and qualified quality was obtained, which provided a reference method for the research and development of related preparations.

Development of a method for determination of progesterone sustained-release formulation in Beagle dog plasma and its pharmacokinetic study / 药学学报

A liquid chromatography-tandem mass spectrometry (LC-MS/MS) method was developed to determine the plasma concentration of progesterone in Beagle dogs, and apply it to the study of the pharmacokinetics of progesterone sustained-release formulation in Beagle dogs. The plasma samples were processed by protein precipitation method and megestrol acetate was used as an internal standard (IS). The quantitation analysis was performed using multiple-reaction monitoring (MRM) mode at the specific ion transitions of m/z 315.2→97.0 for progesterone and m/z 385.2→267.1 for megestrol acetate (IS) under the positive ion condition. Male Beagle dogs were injected intramuscularly with progesterone sustained-release microspheres and the plasma samples were collected at different time points after administration. The relevant pharmacokinetic parameters were calculated by WinNonlin 8.1 software. A good linearity over the range of 0.1-500.0 ng·mL-1 was yielded by this method. The intra- and inter-day precision (RSD) were all less than 13.25% and the accuracy (RE) was within 8.92%. Stability test showed that progesterone in dog plasma was stable at room temperature for 12 h, up to 60 days at -20 ℃ and after three cycles of freeze-thaw. The recovery of it ranged from 71.43%-77.97%. After intramuscular injection of progesterone sustained-release microspheres in Beagle dogs, tmax was 19.00 ± 25.36 h, Cmax was 137.72 ± 11.59 ng·mL-1, t1/2 was 83.83 ± 26.43 h. The drug was released continuously in vivo and in a continuous absorption process for many times with good sustained-release effect. The method developed in this study is sensitive, rapid and stable. It is suitable for the determination of progesterone plasma concentration in Beagle dogs, and can be applied to the preclinical pharmacokinetic study of progesterone-related formulations. The animal experiment scheme of this study was approved by the Animal Ethics Committee of the Academy of Military Medical Sciences.

Preparation, in vitro characterization and pharmacokinetics of paclitaxel thermosensitive gel / 药学学报

Local drug delivery is a new strategy to prevent postoperative recurrence of cancer, thermosensitive gel is a typical topical drug delivery system. In this study, a novel paclitaxel thermosensitive gel (PTG) was prepared to prevent recurrence after chemotherapy for cancer, the effects of drug particle size on release and absorption rate in vivo were investigated. Paclitaxel suspensions with different particle sizes were prepared by medium grinding, high pressure homogenization, air crushing and screening. Using poloxamer as the gel matrix and carbomer as the biological adhesive, Box-Behnen was used to optimize the formulation of PTG. The morphology, viscosity, rheological properties and biological adhesion of thermosensitive gel were characterized. The relationship between dissolution and release of thermosensitive gel was investigated by weight loss method, pharmacokinetics was studied in rats. The paclitaxel suspensions with the particle sizes of 350 nm, 800 nm, 3 μm and 9 μm were prepared, 19% poloxamer 407, 4% poloxamer 188 and 0.1% carbomer were used to prepare PTG. The phase transition temperature of thermosensitive gel was 30 to 35 ℃, there was a good linear relationship between in vitro release and gel dissolution. In the pharmacokinetic study, area under the curve (AUC0-t) increased with the decrease of particle size. In general, the PTG prepared in this study can rapidly change into gel under human body temperature, provided with good adhesion. The release rate in vitro is closely related to the particle size, the release rate increased with the decrease of particle size. This study provides data support for preventing postoperative recurrence of cancer. The animal welfare and experimental process in this paper follow the regulations of the Animal Ethics Committee of the Academy of Military Medical Sciences.

Characterization of butaselen-2,6-dimethyl-β-cyclodextrin inclusion complexes and preparation of injectable solutions / 药学学报

In this study, butaselen-2,‍6-dimethyl-‍β‍-cyclodextrin inclusion complexes were prepared by saturated aqueous solution method to improve the solubility of butaselen, so as to obtain its injection solutions. The content of butaselen in the inclusions was determined by high performance liquid chromatography (HPLC), and then the preparation process was optimized by orthogonal design using the inclusion ratio as an indicator. X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR) and scanning electron microscope (SEM) were used to verify the structure of the inclusions. The effects of the inclusions on the solubility and stability of butaselen were also investigated. The results showed that the optimized preparation process with a mass ratio of 1∶340, an encapsulation time of 3 h and an encapsulation temperature of 70 ℃ resulted in an encapsulation ratio of (91.24 ± 0.42) %, and the results of XRD, FTIR and SEM demonstrated the formation of inclusion complexes. The developed HPLC method is rapid, simple, accurate, applicable, specific and reproducible for the determination of butaselen content in butaselen cyclodextrin inclusion complexes, which can lay the foundation for the development of new butaselen dosage forms and clinical applications and provide technical support.

Gastric cancer-derived mesenchymal stem cells regulate the M2 polarization of macrophages within gastric cancer microenvironment via JAK2/STAT3 signaling pathway / 中华肿瘤杂志

Objective: To investigate the role and mechanism of tumor-derived mesenchymal stem cells in regulating the M2 polarization of macrophages within gastric cancer microenvironment. Methods: Gastric cancer tissues and the adjacent non-cancerous tissues were collected from patients underwent gastric cancer resection in the First People's Hospital of Lianyungang during 2018. In our study, THP-1-differentiated macrophages were co-cultured with gastric cancer-derived mesenchymal stem cells (GC-MSCs). Then, the M2 subtype-related gene, the markers expressed on cell surface and the cytokine profile were analyzed by real-time quantitative reverse transcription polymerase chain reaction (qRT-PCR), flow cytometry and Luminex liquid chip, respectively. The key cytokines mediating the inducing effect of GC-MSCs on macrophage polarization into the M2 subtype were detected and screened by Luminex liquid chip, which were further confirmed by the neutralizing antibody test. The expressions of macrophage proteins involved in M2 polarization-related signaling pathways under the different co-culture conditions of GC-MSCs were detected by western blot. Results: In Mac+ GC-MSC-culture medium (CM) group, the expression levels of Ym-1 and Fizz-1 (1.53±0.32 and 13.22±1.05, respectively), which are markers for M2 subtype, were both significantly higher than those of Mac group (1.00±0.05 and 1.21±0.38, respectively, P<0.05). The level of iNOS in Mac+ GC-MSC-CM group (0.60±0.41) was significantly lower than that of Mac group (1.06±0.38, P=0.023). In Mac+ GC-MSC-Transwell (TW) group, the expression levels of Ym-1 and Fizz-1 (1.47±0.09 and 13.16±2.77, respectively) were both significantly higher than those of Mac group (1.00±0.05 and 1.21±0.38, respectively, P<0.05). The level of iNOS in Mac+ GC-MSC-CM group (0.56±0.03) was significantly lower than that of Mac group (1.06±0.38, P=0.026). The ratios of CD163(+) /CD204(+) cells in Mac+ GC-MSC-CM and Mac+ GC-MSC-TW groups (3.80% and 4.40%, respectively) were both remarkably higher than that of Mac group (0.60%, P<0.05). The expression levels of IL-10, IL-6, MCP-1 and VEGF in Mac+ GC-MSC-CM group were (592.60±87.52), (1 346.80±64.70), (11 256.00±29.03) and (1 463.90±66.67) pg/ml, respectively, which were significantly higher than those of Mac group [(41.03±2.59), (17.35±1.79), (5 213.30±523.71) and (267.12±12.06) pg/ml, respectively, P<0.05]. The levels of TNF-α, IP-10, RANTES and MIP-1α were (95.57±9.34), (410.48±40.68), (6 967.30±1.29) and (1 538.70±283.04) pg/ml, which were significantly lower than those of Mac group [(138.01±24.31, (1 298.60±310.50), (14 631.00±4.21) and (6 633.20±1.47) pg/ml, respectively, P<0.05]. The levels of IL-6 and IL-8 in GC-MSCs [(11 185.02±2.82) and (12 718.03±370.17) pg/ml, respectively] were both strikingly higher than those of MSCs from adjacent non-cancerous gastric cancer tissues [(270.71±59.38) and (106.04±32.84) pg/ml, repectively, P<0.05]. The ratios of CD86(+) cells in Mac+ IL-6-blocked-GC-MSC-CM and Mac+ IL-8-blocked-GC-MSC-CM groups (28.80% and 31.40%, respectively) were both higher than that of Mac+ GC-MSC-CM group (24.70%). Compared to Mac+ GC-MSC-CM group (13.70%), the ratios of CD204(+) cells in Mac+ IL-6-blocked-GC-MSC-CM and Mac+ IL-8-blocked-GC-MSC-CM groups (9.90% and 8.70%, separately) were reduced. The expression levels of p-JAK2 and p-STAT3, which are proteins of macrophage M2 polarization-related signaling pathway, in Mac+ GC-MSC-CM group (0.86±0.01 and 1.08±0.01, respectively) were significantly higher than those of Mac group (0.50±0.01 and 0.82±0.01, respectively, P<0.05). The expression levels of p-JAK2 in Mac+ IL-6-blocked-GC-MSC-CM group (0.47±0.02) were significantly lower those that of Mac+ GC-MSC-CM group (0.86±0.01, P<0.05). The expression levels of p-JAK2 and p-STAT3 in Mac+ IL-8-blocked-GC-MSC-CM group (0.50±0.01 and 0.85±0.01, respectively) were both significantly lower than those of Mac+ GC-MSC-CM group (0.86±0.01 and 1.08±0.01, P<0.05). The expression levels of p-JAK2 and p-STAT3 in Mac+ IL-6/IL-8-blocked-GC-MSC-CM group (0.37±0.01 and 0.65±0.01, respectively) were both significantly lower than those of Mac+ GC-MSC-CM group (0.86±0.01 and 1.08±0.01, P<0.05). Conclusion: GC-MSCs promote the activation of JAK2/STAT3 signaling pathway in macrophages via high secretions of IL-6 and IL-8, which subsequently induce the macrophage polarization into a pro-tumor M2 subtype within gastric cancer microenvironment.